Picador Speed shaft R/H or L/H

£70.00

Listed Under: Picador Polishing Spindles

Picador Speed Shaft, Used for drives on machines or sub-assemblies such as saw benches, can be used as a drive for polishing and other cleaning operations. Die cast aluminium housing with steel spindle, two sealed bearings, flanges, pulleys, nuts. Maximum speed 5000rpm, load not exceeding 45Kg. Dimensions: Casting = 150mm long x 80mm wide securing [...]


Wishlist Email Print Bookmark

Picador Speed Shaft, Used for drives on machines or sub-assemblies such as saw benches, can be used as a drive for polishing and other cleaning operations. Die cast aluminium housing with steel spindle, two sealed bearings, flanges, pulleys, nuts. Maximum speed 5000rpm, load not exceeding 45Kg.

Dimensions:
Casting = 150mm long x 80mm wide securing legs
0.75″ main shaft approximately 200mm long
Leg centre length 115mm
Leg centre width 65mm
2 x 5/8 bearing shoulder
1/2″ L/H or R/H threaded shaft end
2.1/4″ A section pulley
2 x 1/2″ flanges and nut supplied

PLEASE READ DISCLAIMER IN TRADE SECTION

Comments are closed.

Switch Display

1