Wishlist
Email
Print
BookmarkThis kit has been designed to complete abrasive and polishing work on small metal engineered components of brass, copper, alloy and stainless steel. The kit is used with an electric drill although some of the small mops and dentals can be used on a bench grinder fitted with an ABC arbour and chuck. The kit is supplied with abrasives to remove machining lines, scratches and marks. The arbour and chuck can be purchased as a separate item, see below for details.
If you require larger mops for bench polishing on a machine
see: Polishing mop section
Arbour and chuck description. The arbour and chuck is fitted over the bench grinder spindle and retained with grub screws. The chuck is hand screwed onto the arbour, this allows for tightening and release, it is excellent for holding dental mops, felts and abrasives.
Click here to purchase the arbour and chuck.
Kit contains
1 x quarter bar of 80grit satene abrasive
1 x quarter bar of 150grit satene abrasive
1 x quarter bar of 240grit satene abrasive
1 x quarter bar of 300grit satene abrasive
4 x 1 x 1” coloured stitched mops
1 x 60 x 20 flap wheel 150 grit
1 x 30 x 10 mini flap whell 150 grit
1 x supercut polish mini bar
1 x white finish polish mini bar
1 x blue polish mini bar
1 x brown polish mini bar
1 x cartridge roll 80 grit 13 x 25
1 x cartridge roll 120 grit 13 x 25
1 x cartridge roll spindle
1 x 1 x 0.5 sisal mop
1 x 1 x 0.5 white stitched mop
1 x 1 x 0.5 calico mop
1 x 2 x 0.5 sisal mop
1 x 2 x 0.5 stitched
1 x 2 x 0.5 calico
1 x drill arbour for mops
1 x long series felt arbour
1 x 120 grit abrasive rubber point
1 x 180 grit abrasive rubber point
5 x assorted dental polishing felts
5 x assorted polishing felts bobs and cones
